IT is use to save data on server and after delete the data to restore the data from server to router.example>
some time or any time to any reason the data from nvram or ios can be deleted so thats there should be backup in any drive or server .so thats of we use the backup for restore data from server.
Backup and Restore of NV-RAM:-
router conect to server
step 1. copy startup config
step 2. tftp:
step3. ip address of server like as 192.168.1.1
step4. destination of filename xyz (in fig give any destination file name like xyz after given ip .)
step5. coding is in fig.
Step1. first make connectivity to server and router .
step2. Assign the ip in router .
step3. check connection to server.
step4. copy tftp:
step5. startup confi.
step6. give ip address of server.
step7. give source name xyz.(which was give in backup time)
step8. press enter again enter
step9. copy startup confi running config.
See in fig now ,
step 7 in fig
some time or any time to any reason the data from nvram or ios can be deleted so thats there should be backup in any drive or server .so thats of we use the backup for restore data from server.
Backup and Restore of NV-RAM:-
Backup of NV-RAM on server.
step 1. copy startup config
step 2. tftp:
step3. ip address of server like as 192.168.1.1
step4. destination of filename xyz (in fig give any destination file name like xyz after given ip .)
step5. coding is in fig.
Restore of NV-RAM:-
Step1. first make connectivity to server and router .
step2. Assign the ip in router .
step3. check connection to server.
step4. copy tftp:
step5. startup confi.
step6. give ip address of server.
step7. give source name xyz.(which was give in backup time)
step8. press enter again enter
step9. copy startup confi running config.
See in fig now ,
No comments:
Post a Comment
thanks , i will appriciate.